Gravity: Arduino'S Soil Moisture Sensor

  • Product Code: SEN0114
  • Availability: In Stock

Introduction A soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an ideal for monitoring an urban garden, or your pet plant's water level. This is a must ha..

$2.70

Introduction

A soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an ideal for monitoring an urban garden, or your pet plant's water level. This is a must have component for a IOT garden / Agriculture!
The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation.Electroless nickel immersion gold (ENIG)has several advantages over more conventional (and cheaper) surface platings such as HASL (solder), including excellent surface planarity (particularly helpful for PCB's with large BGA packages), good oxidation resistance, and usability for untreated contact surfaces such as membrane switches and contact points.
This soil moisture sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level. More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance).This sensor will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden.


To ease the difficult of using this sensor,a Interface is adapted to allow plug&play.The It is the best match for this sound senor connecting to your .


Note: If you are going to place the sensor to very humid soil, that would make it very easy to get the sensor surface erosion within several days, hence we suggest to use this one Analog Capacitive Soil Moisture Sensor- Corrosion Resistant instead.

Specification

  • Power supply: 3.3v or 5v
  • Output voltage signal: 0~4.2v
  • Current: 35mA
  • Pin definition:
    • Analog output(Blue wire)
    • GND(Black wire)
    • Power(Red wire)
  • Size: 60x20x5mm(2.36x0.79x0.2")
  • Surface finish:Immersion Gold

Shipping List

  • Moisture sensor x1
  • Analog Sensor Cable x1

Projects





Get a text or call if your plant is getting too dry, along with a nice LCD display giving information regarding your plant's health.
Hardware Components:
Particle Photon
Soil Moisture Sensor
I2C 16x2 LCD Display Module
RGB Diffused Common Cathode
Micro USB Connector
Uxcell Perf Board 4x6cm

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good